What Is Industrial Safety?
Industrial Safety Is The Most Important Aspect Of Production Of Any Industry. An Industry Should Never Compromise On Safety For Time, Money Or Anything Else . It Is Very Important In This Sense; Because Even A Small Negligence Or Haste Can Cause A Big Accident. Therefore, An Industry Should Be Very Concerned About Safety And Ensure Maximum Safety For Its Workers.
Industrial Safety Is Very Important For All Employees Or Workers And As Everyone Knows That Working In Any Field Without Safety Awareness Can Cause Serious Physical Harm I.E. A Severe Injury Or Even Death. Due To Which There Is A Risk Of Loss Of Company’s Reputation And Value In The Market. Industrial Safety Is An Important Factor In Running A Company And It Is Very Important To Keep In Mind The Right Safety For The Employees And Give Safety First Priority, In This Article We Will Understand About Industrial Safety In Full Detail.
Complete Information About Industrial Safety
Let’s Start With The Basics First, While Working Or Getting Work Done In Any Industry, You Must Ensure That All Employees Have Special Equipment’s, PPE ( Personal Protective Equipment ) And Other Procedures To Ensure Safety Of Eye Safety, Ear Safety, Head Safety, Foot Safety, Fire Prevention And Respiratory Protection Etc. And They Should Be Given It Free Of Cost, As This Is The First Requirement Of Industrial Safety.
To Make Your Workplace Safe, You Need To Know What Hazards You Can Expect To Encounter On The Site And What To Do To Control And Eliminate Them. This Information Also Needs To Be Considered In Light Of The Value Of Working Safely And Ways To Safely Control These Hazards In Your Workplace.
Here Below I Have Explained In Correct Words The Various Hazards That Are Often Encountered In The Process Plants Of Any Industry, I.E. Factories. The Following Are The Hazards That Are Often Found In The Industry.
What Is The Work Of An Electrician: What Is An Electrician’s Job?
Types Of Hazards In Industry
To Make Your Industry Workplace Safe, You Must Know What Hazards You Can Expect To Encounter And What To Do To Control And Eliminate Them. If You Know About The Hazards , It Will Be Easier To Control The Risks Associated With Them . Read The Hazards Below:-
1. Existing / Physical Hazards
Certain Features Of The Plant Layout And Design Such As Location Of Equipment, Stairs, Entrances And Exits, Floor Layout, Platform, Illumination, Heating And Ventilation Systems Are Existing And Built In And You Cannot Change Them. These Can Cause Accidents And The Best You Can Do Is To Identify And Avoid Them.
2. Chemical Hazards
This Is One Of The Most Dangerous Hazards Where Chemicals Are Concerned, One Must Know The Properties And Hazards Of The Particular Chemical Involved. Read The Material MSDS Provided With It Before Handling. Wear A Chemical Suit, Gloves, Fresh Respiratory Mask And Googles Or Face Shield. Ensure That There Is No Splash Or Spillage Of Chemicals.
3. Electrical Hazards
Almost Every Job You Do Will Involve Exposure To Electricity And Its Hazards. Electricity Is Present Everywhere And The Hazards Are More In Industry Because The Voltage Found There Is Very High. Avoid Touching Energized Or Hot Wires. Always Use Equipment And Tools That Are Grounded And Insulated. Do Not Use Frayed, Damaged Or Stripped Cord.
Metal Objects And Water Are Good Conductors Of Electricity. Insulate Nearby Metal Objects. Avoid Wet Surfaces And Use Insulating Mats While Working On Panels.
4. Mechanical Hazards
Various Cases Of Accidents Involve The Possibility Of Moving Machinery Or Equipment’s Parts. A Worker Has To Take Special Care To Keep His Clothes, Body And Tools Away From Moving Machinery. When A Machine Has To Be Shut Down For Repairs, The Machine’s Electrical Controls Should Be Locked And Warning Signs Such As LOTO Should Be Posted On The Panel And The Procedure Should Be Applied.
Working On Pipelines, Tubing System Will Pose Risk To Heat And Pressure, Accidents Can Be Avoided By Isolating The System And Keeping It Cooled And Depressurized.
Many Plants Have Hand Trucks, Forklifts Etc. For Moving Materials Within Limited Aisles, If Work Is To Be Done Near Aisles Or Traffic Routes Protect Yourself And Others By Erecting Signs And Barricades To Warn Traffic Otherwise Serious Injury May Result If Someone Is Struck By A Passing Vehicle. Do Not Place Tools And Materials In Such A Way That They Would Be A Hazard To Traffic By Falling Into The Aisle.
Temporary Scaffolds, Platforms Are Erected When Working At Heights On Building Walls, Ceilings And Roofs. These Objects Should Have Railings And Guards To Protect Workers, Tools And Materials From Slipping And Falling Off The Edge. Install Signboards Under The Scaffold To Warn Passersby Of Falling Objects.
Make Sure That Workers Are Attentive And Alert While Working At Height, As A Slip Can Be Fatal For Their Life. Ladders Used For Working At Height Should Be Secured At Both Top And Bottom And Should Be At A Safe Angle, The Steps Of The Ladder Should Be Free From Tools, Grease, Etc.
Hanging Scaffold Is Secured From Above By Rope Rigging And The Platform Must Be Level, Safety Belts And Harness Must Be Used To Protect Yourself When Working At Heights And On Roofs.
5. Environmental Hazards
Sometimes Workers Need To Work In Hot Situations Near A Boiler Or Heater, Although These Are Normally Insulated There Is Usually Some Heat In The Area. Install An Air Blower To Provide Cool Air And Expel Hot Air.
Severe And Sharp Stomach Or Muscle Cramps Are Caused By Excessive Loss Of Body Moisture And Salt. Dizziness, Weak Pulse, Lower Than Normal Body Temperature, Heavy Sweating Are Symptoms Of Heat Exhaustion.
Radiation From X-Rays And Radioactive Materials Can Cause Serious Damage To The Human Body. To Reduce The Risk Of Radiation, Wear Special Protective Clothing And Use A Film Badge Meter. Radiation Areas Should Be Clearly Notified With Radiation Signs.
PPE Required For Industrial Safety
To Protect And Control From All The Above Mentioned Hazards, Some Such Mandatory And Required Ppe Should Be Worn Which Is Very Important For The Industrial Safety Of The Workers. Apart From Keeping The Workers Safe On The Site, These Ppe (Personal Protective Equipment) Also Provide Protection In Case Of Any Untoward Incident. That Is Why It Is Necessary To Protect All The Points Given Below Through Ppe.
Head Protection
Protecting Your Head Is Easy And Can Save You From A Lot Of Pain If A Situation Like This Does Occur. Wearing A Safety Helmet Can Be As Simple As Putting On A Helmet Or Hard Hat Before Entering A Space Where Falling Objects May Occur. Injuries To The Head Can Result In Brain Damage, But You Can Greatly Reduce The Chances Of Serious Injury By Wearing A Safety Helmet.
Eye Protection
Any Injury To The Eyes Can Be Very Serious And Possibly Permanently Damage The Victim. It Is Important To Make Sure Your Eyes Are Covered At All Times By Wearing Safety Googles Or Other Forms Of Eyewear. Make Sure The Glasses You Are Wearing Also Provide Protection Around The Edges Of Your Eyes, Otherwise Flying Debris Can Get In From The Side And Damage Your Eye.
Ear Protection
Wearing Ear Protection Is Important For Us Because Without It, Our Eardrums Are Severely Damaged By The Constant Loud Noises In The Workplace. Ear Plugs And Ear Muffs Are The Most Common Forms Of Ear Protection, Although There Are Other Options, Such As Disposable Hearing Bands.
By Wearing These Pieces Of Equipment, You Will Not Only Be Able To Protect Yourself From Loud Noises, But Also Protect Your Ears From Flying Debris That Can Enter The Ear And Possibly Cause An Infection.
Foot Protection
It Is Also Very Important To Protect Your Feet And Toes As Any Object, Tool Or Material Can Fall On Our Feet And Harm Them. That Is Why It Is Mandatory For Everyone To Wear Safety Shoes At The Worksite. These Safety Shoes Have A Strong Steel Protection In The Front Part Which Protects Our Feet From The Material Falling On Them.
Hand Protection
It Is Necessary To Wear Safety Gloves To Protect Our Hands From Any Chemical Or Other Substances And Any Sharp Objects. Gloves Also Come In Many Types, Before Wearing Them We Should Make Sure Which Type Of Safety Gloves Are Required For That Work.
Respiratory Protection
Working In An Area Where The Air Is Constantly Filled With Pollutants Can Be Dangerous And Can Eventually Result In Serious Respiratory Problems For Individuals Working In These Areas. An Easy Way To Protect Yourself From Poor Air Quality Is To Wear A Respiratory Mask While Working In These Areas. There Are Many Types Of These Masks, They Should Also Be Selected According To The Work And Area.
Fire Prevention
Working In An Industrial Area Means There Is Always A Chance Of A Fire. If Such A Situation Arises, You Will Want To Be Prepared And The Best Way To Do This Is To Have A Fire Extinguisher On Hand Everywhere. A Fire Extinguisher Is The Best Way To Extinguish Or Control A Fire Until The Fire Department Arrives.
To Ensure Industrial Safety, It Is Important To Research And Follow All Safety Rules While Working In The Industrial Area. Everything Can Change In A Second. That Is Why It Is Everyone’s Responsibility To Follow All Safety Rules And Use Safety Equipment ( Ppe’s ) Keeping In Mind The Safety Of Yourself And Your Co-Workers .
