15 Safety Topics for Daily TBT: Tool box Talk Topics

Tool box Talk Topics – Friends! On Every Site, A Daily Toolbox Is Required To Provide Workers With Accurate Information About The Work, Potential Hazards, And Safety Measures. I Will Provide You With Comprehensive Information Regarding Daily Toolbox Talk Safety Topics. The Topics Listed Below Will Make It Simple For You To Participate In Toolbox Talk.

15 Safety Topics for Daily TBT (Tool box Talk)

Read Each Safety Topics For Daily Toolbox Talk Topic Carefully To Get Ideas, And You Can Incorporate Relevant Information Into Your Daily Toolbox Talk. You Can Use This Information In Your Safety Topics For Daily Toolbox Talk Meeting To Explain It To Your Staff Because It Is Presented In Hindi, Making It Simple For You To Comprehend.

15 Duties Of Security Officer In 2025: Security Officer Duties

TBT Full Form in Safety

You Are Aware That It Is Crucial To Carry Out Daily TBT At Any Location; The Full Form Of TBT Is Tool Box Talk, Which Is Also Known As Tool Box Meeting. Which The Supervisor Must Carry Out Before Beginning The Morning’s Work On The Site. Let Us Now See The TBT Topics Of Doing It Below.

1. Portable Ladder:

A Fixed Ladder Or Platform Is Not Always Necessary When Working At Heights. When Working At Heights Where There Is No Fixed Ladder Or Platform To Reach, Portable Ladders Are Used. Working At Heights Can Occasionally Be Risky. Portable Ladders Are A Safe Means Of Reaching Heights If Used Carefully. When Using Portable Ladders, Be Sure To Follow These Safety Precautions:

15 Safety Topics for Daily TBT: Tool box Talk Topics

How To Choose A Ladder?

The Work’s Height Should Be Taken Into Consideration When Selecting The Ladder. The Ladder Should Always Be 2 Feet Higher Than The Work Height.
If You Want To Work Inside The Plant, You Shouldn’t Use A Wooden Ladder. Verify That No Ladder Rung Is Broken Or Missing Before Using The Ladder. Verify That The Ladder Is Securely Fastened. Its Side Bars Or Rungs Should Not Be Loose.
The Ladder Ought To Have Hooks At The Top And A Rubber Cover At The Bottom For Attaching It. Using Ladders Make Sure The Floor Below The Stairs Is Level And Not Slippery Before Installing The Stairs. Hook The Ladder To Some Support Above Or Tie It With A Rope.
The Ground Should Be Level With The Ladder. The Angle Of The Stairs Should Always Be Set At 1/4 Of A 75° Degree Angle.
Always Use A Safety Belt When Working At A Height Of More Than 10 Feet.
While Climbing Or Descending Stairs, One Should Always Face Towards The Stairs And Hold The Side Bar.
Never Work More Than One Person’s Capacity On A Ladder. Only One Person May Work On A Ladder At A Time.
While Ascending Or Descending The Stairs, You Should Not Hold Any Luggage. Use A Rope To Pick Up And Take Down Luggage.
Never Place The Ladder On Moving Equipment Such As Head Trolley Etc. And Do Not Use The Ladder When Strong Winds Are Blowing.
Never Place The Ladder In Front Of A Closed Door Or Window Pane.
While Working On A Ladder, Do Not Bend Here And There.
The Ladder Should Never Be Placed Near Any Electrical Wires. While Working On A Ladder Do Not Joke Or Laugh In Any Way And Do Not Throw Any Item Down Or Try To Catch It.
Never Replace A Ladder With A Railing Or Construct A Bridge To Cross It If You Intend To Misuse It. Ladder Maintenance
After Each Use, Clean The Ladder And Store It In Its Designated Location. The Ladder Should Never Be Kept In An Open Area Or On A Path.
After Using The Ladder, Notify Your Inspector Of Any Flaws And Have Them Fixed.

2. Safety In Conveyor Belt

In Our Plant , Limestone, Additives, Gypsum And Flyash Etc. Are Transferred Through Conveyors. In Any Plant, Conveyors Are Frequently Utilized. Serious Accidents Can Occur During The Operation, Maintenance, And Cleaning Of Conveyors If The Necessary Precautions Are Not Taken. Therefore, The Following Precautions Should Be Taken While Working On Conveyors:

Is The Conveyor Belt Safe?

Always Check To See That The Pullcords Are Installed And In Good Working Order On Both Sides Of The Conveyor Belt. Safety Guards Should Be Installed On The Drive And Tail Pulleys, Couplings, And Other Conveyor Moving Parts. If You Don’t Hear The Siren When A Conveyor Starts, Tell Your Supervisor Or The Officer In Charge Right Away. The Walkways On Either Side Of The Conveyor Ought To Be Spotless. When Conveyors Are In Use, It Is Not A Good Idea To Do Maintenance Or Cleaning Work On Or Near Them. Loose Clothes Should Not Be Worn While Working In The Conveyor Area.

When A Conveyor Belt Is On Or Off, You Should Never Cross It. Cross The Conveyor Belt Only At Those Places Where Cross Over Bridges Are Provided.
In Case Of Emergency The Pull Card Should Be Used To Stop The Moving Belt.
Perform Any Repair Work On The Conveyor Only After Obtaining Proper Work Permit And Keep The Pull Card And Local Stop Switch Closed.
A Hot Permit Must Be Obtained To Ensure That There Is No Risk Of Fire When Welding Or Cutting Is Done On The Conveyor.

3. Safety In Gas Cutting Works

Welding And Gas Cutting Work Is Often Done In Industries . During This Work, There Is A Risk Of Fire And Explosion, Electric Shock, Burns And Poisonous Gas And Smoke. Therefore, The Workers I.E. Welders Should Be Aware Of All The Safe Practices.

Topic: Gas Cutting Safety?

Oxy-Acetylene Welding / Cutting

Use Colored Glasses And Leather Gloves To Protect Yourself While Gas Welding Or Cutting. Using Soapy Water, Look For Gas Leaks From Any Gas Set Component Or Fitting. Replace The Broken Equipment Right Away. To Move Cylinders From One Location To Another While Keeping Them Tied, Use A Cylinder Trolley. Make Sure There Is No Flammable Material In The Work Area Before Beginning Welding Or Cutting, And Cover It With Fire-Resistant Sheets To Prevent Fire. Always Use Red Colour Hose For Fuel Gases Like Acetylene / LPG And Blue Colour Hose For Oxygen And Ensure That The Length Of Both The Hoses Is Equal.

Before Fitting The Regulator In The Cylinder, It Is Necessary To Clean The Cylinder Valve And The Regulator Seat To Prevent Leakage.
To Work In Closed Spaces, Keep The Cylinders Outside And Make Proper Arrangements For Ventilation.
Oxygen Gas Hose And Regulator Fittings Should Never Be Greased Or Oiled. Acetylene Gas Should Never Be Used With Copper Fittings. To Prevent Flash Back, Use Flash Back Arrestor In The Regulator And Non-Return Valve In The Fuel Gas Line.
Before Starting The Work, Ensure That The Gas Torch Is Completely Closed, After That First Open The Valve Of The Oxygen Cylinder And Then The Valve Of The Acetylene Cylinder.
While Opening The Cylinder Valve, Stand Away And Open It Slowly.
Use A Lighter To Light The Torch. Never Use A Welding Arc, Hot Metal, Or Matches. After Completing Work In A Confined Space, Turn Off The Gas Supply From Every Point, Even If The Work Is Stopped For A Short While.
Close The Oxygen And Acetylene Valves First After The Work Is Finished.

Difference Between Hazard and Disaster Explained with Examples

4. Safety In Welding Work.

All Business Sectors Frequently Employ Welding Workers. There Is A Possibility Of Fire And Explosion, Electric Shock, Burns, Poisonous Gas, And Smoke During This Work. Therefore, The Workers I.E. Welders Should Be Aware Of All The Safe Practices.

Make Sure The Supply Is At Least 3 Metres Away From The Holder.
Conduct Regular Checks On The Materials, Cables, And Electrode Holder Insulation. Replace The Damaged Cables Right Away.
Verify That The Power Source And Cables Are Free Of Dirt Or Dust. Earth The Welding Object Separately From The Welding Return Connection. Never Connect The Earthing Cable To Pipes Carrying Flammable Liquids Or Gases.
Keep Cables Securely In Place To Prevent Any From Getting Stuck Or Falling.
Cover The Plug Terminal To Keep Metal Objects From Short Circuiting It. Keep The Amount Of Power As Per The Design Of The Cable.
Put The Pieces Of The Electrode Into The Vessel. Burn The Electrode So That It Has A Length Of 38 To 50 Millimeters From The Holder. The Electrode Holder Will Be Damaged If Burned For Longer Than This. After The Work Is Finished, Disconnect The Welding Machine From The Power Source And Remove The Electrode From The Holder And Keep The Holder In A Safe Place.
Before Starting Welding, Remove Flammable Materials From The Work Area Or Cover Them With Fire-Resistant Sheets.
While Working In A Confined Space, Tie The Cylinder / Welding Machine Outside And Make Arrangements For Proper Ventilation.
Use Welder Screen Of Correct Design.
Use Necessary Personal Protective Equipment.

5. Is Scaffolding Work Safe

Many Times In A Factory, One Has To Work In Such Places Where There Are No Existing Means To Work, There Work Is Done By Making Scaffolding . In Addition, Scaffolding Is Constructed For Many Construction-Related Tasks. Because Scaffolding Failure Can Result In A Serious Accident, It Is Critical To Know What Safety Precautions Should Be Taken When Building Scaffolding. The Freight Vehicle’s Carrying Capacity Ought To Be At Least Four Times The Anticipated Load.

The Pole’s Height Should Not Exceed Four Times Its Base.
A Sturdy Support Must Be Used To Secure The Freight.
Use The Base Plate To Make The Freight, And Make Sure The Place Where It Will Be Made Is Level And Can Hold The Weight Of The Freight And Work.
A Landing Platform With A Railing And A Toe Guard Should Be Provided For Higher-Height Freight At Every 9 Meters.
A Suitable Ladder To Climb On The Freight Is Just As Important As The Cargo Itself.
The Vehicle Ought To Have A 100-Mm Toe Guard, A 122-Mm Guard Rail, And A 600-Mm Mid Rail.
The Grating Must Be Securely Fastened To The Rope And The Working Platform Must Be At Least 46 Centimeters Wide.
Only Fixed Clamps Should Connect Horizontal And Vertical Members.
There Should Be No Scattered Items On The Platform.
The Tool Box Should Contain Small Items.
The Freight Should Be Opened From Top To Bottom When Opened.
Pipes That Have Been Rented Shouldn’t Be Dropped; Instead, A Rope Should Be Used To Bring Them Down.
A Sign That Reads “Fare Is Being Made” Ought To Be Posted On The Vehicle Until The Fare Is Paid. When Making The Beam, Never Use Faulty Clamps, Pipes, Or Other Materials.

6. Electrical Safety

Nowadays, Electricity Is Used In Every Aspect Of Our Lives, From Factories To Homes. Life Without Electricity Cannot Be Imagined Today. Electricity Is Our Friend But If We Do Not Work With It Carefully, A Serious Accident Can Occur.

Electrical Security What Can I Do?

Include Earthing For Each And Every Electrical Appliance. Always Verify Isolation Before Working On Electric Equipment. Before Beginning The Work, Check To See That The Motor Or Transformer Is Turned Off. Before Beginning Any Work, Discharge The HT Drive And Capacitor Panel Twice. Always Wear Safety Gloves.

Ensure That Every Electrical Appliance Is Earthed In Two Locations. Before Starting The Cable Connection, Discharge Twice.
Hand Blowers And Grinders Must Always Be Grounded.
Make Sure There Is Enough Light In The Workplace. After The Job Is Finished, Clean The Work Area.
Using The Appropriate Size Of Cable, Connect The Welding M/C Supply To The Earth And Switch.
Utilizing A Double Test Lamp And Multimeter, Test The Three-Phase LT Supply.
Before Charging The Device, Check The IR Value. Always Wear The Right PPE.
Ensure Electrical Work Permit For Maintenance Of Motor And Other Electrical Equipment.
In The Safe Area, Use Only A 24 Volt Test Lamp.

What To Avoid?

Do Not Start Work Without Proper Shutdown.
Work On A Live Wire At All Times. Never Make Temporary Connection Of Blower.
The Welding Machine Should Not Be Connected For A Short Period Of Time.
Do Not Come To Duty Without Shoes.
Rest Or Talk To Others Away From The Work Area. Smoke A Cigarette Or Beedi Away From Electrical Equipment.
Do Not Wear Loose Clothes.
Never Use A Single Test Lamp To Examine A Three-Phase LT Supply.
In The Double Test Lamp, Do Not Use Lamps With Different Wattages.
Earth Should Never Be Used In Place Of Neutral.

7. Compressed Gas Cylinder Safety

Every Factory Handles The Storage, Upkeep, And Transportation Of Gas Cylinders From One Location To Another. If Care Is Not Taken While Using Gas Cylinders, Then Apart From Physical Injury, Fire And Explosion May Also Occur. Hence, The Following Precautions Should Be Kept In Mind While Using Gas Cylinders.

Whether The Gas Cylinder Is Empty Or Full, Equal Care Should Always Be Taken While Using It, Transporting It From One Place To Another And Storing It.

Gas Cylinders Safety?

Gas Cylinders Should Never Be Rolled Or Pulled.
When Moving Gas Cylinders Between Locations, A Hand Trolley Should Always Be Used.
Gas Cylinders Should Be Transported In Cages To High Places.
Using A Sling Should Not Be Used To Lift Them.
To Prevent Them From Falling, Gas Cylinders Should Always Be Secured With A Chain.
The Acetylene Cylinder Should Always Be Kept Upright. It Should Never Be Kept Lying Down.
There Should Be No Damage To The Valves And Fittings Of The Gas Cylinder. They Should Not Be Used To Pull The Cylinder.
The Gas Cylinder’s Valve Should Be Opened And Closed Slowly And Carefully. Never Apply Excessive Pressure.
The Gas Cylinder Should Always Be Kept In A Shed With Ventilation, Away From The Sun, Any Heat Source, And Anything Flammable.
Gas Cylinders Should Never Be Thrown From Above Or Allowed To Collide With Each Other.
Flash Back Arrestors Must Be Installed On Gas Cylinders Prior To Use.

8. Is The Hand Trolley Safe

The Use Of Hand Trolleys Is A Common Practice In Any Factory. Hand Carts Prove To Be Extremely Useful When Transporting Small Items Or On Routes That Dumpers, Hydras, And Other Vehicles Cannot Travel. Incorrect Selection, Unsafe Loading, Or Unsafe Operation Can Lead To Accidents When Used. The Presented Safety Instructions Are Intended To Reduce The Frequency Of These Incidents.

Hand Trolley Safety

Pick A Hand Cart Verify The Handcart’s Wheels And Handle Thoroughly Before Using It.
Depending On The Quantity, Size, Type, And Nature Of The Load, Choose The Appropriate Vehicle.
Keeping In Mind The Weight Of The Load And The Distance To Be Travelled, Decide On The Number Of People Pushing The Cart.
Maintain The Wheels’ Lubrication In Good Condition.

Load On A Cart

When Placing Goods/Machine/Cylinder Etc. On The Vehicle, Park The Vehicle On A Flat Surface And Keep Obstacles In Front And Behind The Wheels.
If You Want To Keep Different Types Of Things Together, Then After Keeping The Heavy And Flat Shaped Things, Keep The Light And Other Types Of Things.
Place Barriers In Front Of And Behind Cylindrical Objects Like Gas Cylinders, Drums, And Pipes After They Have Been Placed. After Placing Loose Items On The Cart, Tie Them Together.
When Loading Luggage Into The Vehicle, Keep Your Feet Away From The Wheels. Make Sure That No Part Of The Load Sticks Out When You Put It On The Vehicle.
Keep The Height Of The Load On The Vehicle Such That The Road Ahead Is Clearly Visible.
The Load On The Vehicle Should Be Such That It Can Be Easily Moved By The Available Persons.
Place Any Heavy Machine, Motor, Roller Assembly, Or Other Similar Item In The Middle Of The Vehicle If Necessary.
Do Not Allow Any Person To Sit In A Vehicle, Whether Full Or Empty.

How Does The Vehicle Operate

Avoid Driving The Vehicle At A Speed That Makes It Difficult To Maintain Control.
Use Paths That Are Two Feet Wider Than The Vehicle’s Width To Drive The Vehicle.
While Driving The Vehicle, Be Cautious Of Pits And Breakers Because At These Places The Vehicle May Bounce And The Goods Loaded On It May Fall Or The Vehicle Itself May Become Unbalanced.
While Taking The Vehicle Uphill, Pull It And Also Push It From Behind, And While Taking It Downhill, Hold It From Behind.
Passing The Vehicle Through Blind Turns Or Gates Should Be Done With Caution. Send Someone Ahead To Alert The Vehicles And People Coming From The Opposite Side, If At All Possible.
When Driving On Congested Roadways, Signal Employees Ahead To Dismount. Maintain A Safe Distance From The Vehicle While Driving.
Maintain Mutual Coordination While Driving And Avoid Joking.

Farana Crane vs Hydra Crane: Key Differences Explained

9. Is Height Work Safety

Many Works Are Done At Heights In The Factory. In Many Places, We Have Permanent Platforms, Railings And Stairs For Working, But Sometimes We Have To Arrange All These For Work. Therefore, If We Do Not Work Carefully At Heights, A Fatal Accident Can Also Occur. When Working At Heights, Follow The Following Safety Precautions. Get A Permit To Work At Heights Before You Start Working There.

Use Safety Belts When Working At Heights Of 10 Feet Or More. Only Double-Lanyard, Full-Length Safety Belts Are Permitted In Our Factory.
When Ascending Or Descending From Heights, Use A Fall Arrester, Life Line, Or Safety Net In Accordance With The Requirements. To Get To The Workplace, Make Sure There Is A Safe Platform And A Ladder Available. Do Not Work Without It
Before Climbing To A Height, Check That Your Shoes Are Free From Oil, Grease, Mud Etc. And That Your Shoes Are Properly Tied.
Your Safety Belt Ought To Be Fastened To A Sturdy Support A Little Bit Higher Than The Working Height.
While Working At Height, Neither Throw Any Object Down Nor Try To Catch It By Throwing It From Below. With The Help Of A Rope, Move The Object Up And Down.
Install Barricades And Warning Signs As Needed At The Work Site.
The Competent Officer Should Inspect The Equipment, Stairs, And Platform Constructed For The Work.
While Doing Painting Work, Keep In Mind To Stay Away From Activities Like Painting, Welding, Cutting Etc., Otherwise There Is A Risk Of Fire.
Use Paint Cans Carefully And Do Not Smoke While Painting. After The Work Is Finished, You Should Get Rid Of Everything That Isn’t Necessary To Keep The Work Area Clean. When Working At Heights, You Should Never Leave Any Material Open That Could Fall.

10. PTW (Work Permit System)

Obtaining A Work Permit Is An Important Part Of Working Safely. A Work Permit, Also Known As A PTW, Guarantees That The Equipment For Which A Permit Has Been Issued Has Been Utilized, That All Of The Necessary Safeguards Have Been Taken, And That It Is Safe To Work On It. In Our Factory, We Accept The Following Work Permits For Various Positions.

Permit For Work At Height.
Permit For Excavation Work.
Permit For Hot Work (Welding, Cutting).
Permit For Work On LT And HT Equipment.
Permit For Confined Space.

Therefore, Before Doing Any Of The Above Work, Ensure That The Correct Work Permit Has Been Taken As Per The Work And All The Safety Precautions Written In The Work Permit Have Been Taken. The Site Engineer Is In Charge Of Making Sure That All Of The Aforementioned Precautions Are Taken And That Employees Are Aware Of Them.

The Holder Of The Permit Is Responsible For Ensuring That All Of His Personnel And Equipment Have Been Removed From The Work Site And That All Of The Usual Safety Precautions Have Been Reinstated.

The Work Permit Must Only Be Returned After The Aforementioned Precautions Have Been Taken. Once The Work Permit Is Returned, Do Not Attempt Any Type Of Work On That Equipment Again As This May Cause An Accident.

11. Hand Tools Safe

Hand Tools Are Used In Large Quantities In Factories. Their Misuse Can Lead To Injuries To Other Parts Of The Body Apart From The Hands. Hence, It Is Extremely Important To Know About The Dangers And Precautions Related To Them. When Using Hand Tools, The Following Factors Can Lead To Accidents:

Are Hand Tools Safe?

Not Using The Right Tool
Not Using The Tool Properly
Misuse Of The Instrument
Using A Faulty Tool
Not Using Safety Equipment

What Precautions?

Always Use The Appropriate Tool For The Job.
Check The Tools Before Use And Do Not Use Faulty Tools.
For Tools That Have A Handle (Eg File, Hammer) Make Sure That It Is Fitted Correctly.
Do Not Use A Faulty Handle.
Do Not Use Tools Whose Heads/Tips Have Become Coarse. Sharpen Them From Time To Time.
Use The Screwdriver Only When You Have Something Else In Your Hand. Keep The Edge Of Sharp Tools Covered With A Cover.
Never Use Worn Or Damaged Tools.
Use Only Tools Of Correct Measurement And Correct Size.
Never Misuse Hand Tools (E.G. Using A Screw Driver As A Crow Bar, A Spanner As A Hammer, Etc.).
Never Drop A Hand Tool From Above Or Throw It At A Height.
When Working At Heights, You Should Tie Up Your Hand Tools And Avoid Carrying Them In Pockets.
Keep Tools In A Rack Or Tool Box When Not In Use; Do Not Scatter Them All Over The Place.

12.Personal Protective Equipment (PPE)

Personal Safety Equipment Includes Things Like Gloves, Safety Helmets, And Safety Belts. We Are Responsible For Making The Factory Technically Safe And Employing Safe Work Practices. In Addition, Use The Appropriate Safety Gear For The Job. Here It Is Important To Know That Safety Equipment Does Not Eliminate Dangers, But Protects Us By Acting As A Barrier Between Us And Danger. As A Result, We Must Carry Out The Work In Accordance With The Established Guidelines And Make Use Of All Required Safety Gear.

13. Portable Electrical Equipment

Small Electrically Operated Tools Like Grinder, Drill Machine, Blower Etc. Are Often Used In Factories Because These Tools Are Operated By Electricity And Are Used By One Person. In Such A Situation, In Addition To Physical Harm, Electric Shock Can Occur If Complete Care Is Not Taken When Maintaining And Using Them. Therefore, The Following Precautions Should Be Taken While Using These Tools:-

Check That The Wire Is In Excellent Condition And That The Plug Top Has Been Installed In The Machine.
Don’t Use The Wire If It Has Been Cut In Any Way.
Verify That The Machine Is Properly Grounded. If The Casing (Cover) Of The Equipment Is Broken, Do Not Use The Equipment And Have The Cover Replaced.
Verify That The Buttons On The Appliance Are Functioning Properly Before Using It.
Before Connecting The Equipment To The Power Supply, It Must Be Turned Off At All Buttons.
Make Certain That The Device’s Power Cable Is The Right Length. Neither Should It Be Stretched Nor Should Wires Be Added To Make It Longer.
Don’t Leave Appliance Wires On The Floor In A Way That Could Trap Them And Cause Them To Fall Or Cut Them And Give You An Electric Shock. Do Not Use Small Portable Electrical Tools In Wet Or Damp Locations.
Do Not Use Worn Or Damaged Bits With The Equipment.
Remove The Plug And Turn Off The Switch When The Appliance Is Not In Use.
While Using Electrically Operated Equipment, Safety Glasses Should Be Used To Protect The Eyes And Gloves Should Be Used To Protect The Hands.
A Competent Officer Should Regularly Inspect Electrically Operated Equipment.

14. Confined Space Safety

There Are Many Confined Spaces In The Factory Like Cells, Cyclones, Hoppers Inside The Bag House, ESP And Other Closed Equipment Of The Plant, Where There Are Limited Doors For Entry And Exit And There May Also Be Lack Of Air. If Necessary Precautions Are Not Taken Before Working In Such Places, A Serious Accident May Occur. The Following Things Should Be Kept In Mind While Working In A Confined Space

Before Entering A Closed Place, Ensure That The Work Has Been Fully Inspected By A Competent Officer And A Work Permit Has Been Obtained.
Do Not Enter The Building Unless Your Inspector Gives You Permission To Do So.
Check To See That No Equipment Is Connected To The Production Line Or Power Lines At All. While Working In A Confined Space, Use Only 24 Watt Hand Lamp.
When Working In A Confined Space, Make Sure That Communication Between People In And Out Is Easy.
Make Sure That All Safety And Emergency Equipment Is Present And In Working Condition. Make Sure To Use Them.
While Working In An Enclosed Space, At Least One Person From Outside Must Remain As An Overseer And A Man Must Be Available For Rescue.
Follow All Safety Rules According To The Work Permit Before And During Work.
Do Not Attempt To Rush. After The Work Is Done, Remove All Items From The Work Site . Return The Work Permit Only After Thoroughly Inspecting The Work Site.
In Case Of An Emergency, Inform Others Before Performing Rescue Operations.

15. Slip-And-Fall Accidents

Slipping, Tripping And Falling Are Common Causes Of Injuries At Work, Which Can Sometimes Be Serious And Even Fatal. Simple Steps Can Be Taken To Avoid These.

Slip:

Oil, Grease, And Other Spills On Smooth Surfaces Shoes That Aren’t Right, Wet Floors, Slick Things, Etc.

To Stumble Over:

Uneven Floors, Sudden Changes In The Level Of The Floor Surface.
Obstructions In The Aisles, Such As Tools, Trolleys, Packing Materials, Pallets, Racks, And Dangling Wires Objects That Protrude, Drawers That Protrude Forward, And So Forth.
Inadequate Footroom On Stairs And Stairs That Are Damaged Or Slippery.
Poor Lighting And Sudden Changes In Light Levels In Work Areas, Corridors And Stairwells. Dark Places. Clothing That Is Long And Flowing.

Fall:

The Floor’s Unprotected Threshold Moving Vehicle.
Floor Edges That Are Not Covered, Work Scaffolding, Elevated Corridors, Staircases, And Tall Material Stacks.
Unstable High Stools, Chairs, And Ladders.
Work Scaffolding That Is Unstable And A Weak Roof Faulty Scaffolds And Stairs Unstable Circumstances.

Floor:

Keep Your Floors Dry.
On Wet Surfaces, Walk Slowly.
Keep The Workspace Clean Place Equipment In Such A Way That Dangling Wires Do Not Cross Pedestrian Paths.
Make Use Of Safe, Fixed Wire Covers.
Colors That Are Easy To See Can Be Used To Show Changes In Floor Levels.

House Kepping:

Keep Stairs, Passageways, And Hallways Dry And Clear.
Keep Items Out Of These Places. Keep An Eye Out For Spills And Clean Them Up Right Away.
Enhance Spill-Generating Activities.
Make Sure That Materials, Tools, Equipment Etc. Are Kept In Their Correct Places.
Remove Unwanted Material Promptly, Clean Up Clutter.
Do Not Leave Objects Where They Can Be Tripped Over.
Make Sure There Is Enough Light In The Work Area.

Clothes:

Make Sure The Laces On Your Shoes Are Tied.
Make Sure Your Shoes Are Free Of Mud, Oil, Grease, And Other Contaminants.
Don’t Wear Clothes That Are Too Loose.
Don’t Drive Too Fast. Slow Down When Crossing Curves, Corners, Obstacles, Etc.